Is a balaclava the same as a ski mask?
Mostly, yes. Both cover the head and neck. Ski mask is the everyday name in the US; balaclava is the general term used by makers and suppliers.
Each balaclava mockup puts your logo on a 3D face covering: open face, hooded, quilted zip, mesh-look or neck gaiter. Every style has a front print area, and some add a side, hood or cuff area.

6 mockups
Common questions about balaclava and face mask mockups.
Mostly, yes. Both cover the head and neck. Ski mask is the everyday name in the US; balaclava is the general term used by makers and suppliers.
A one-hole balaclava has a single opening for the eyes or the whole face. A three-hole style has separate openings for each eye and the mouth.
Every style has a front print area. Place your design above the face opening, then turn the model to make sure the edges are not cut off by the curve.
Rib knit, polar fleece, waffle knit, quilted puffer and a sports mesh look are common picks. Whatever you choose covers the whole balaclava.
Choose by how much of the face is covered and what comes with it.

Covers the head and neck with a wide face opening, plus a side print area next to the front.

A hood-style balaclava with a drawstring around the face opening.

A beanie and neck gaiter in one, with a front area and a separate cuff area.

A long hood that falls over the shoulders, with its own hood print area.

A padded winter style with a zip, printed across the front.

A close-fitting style with a mesh-look surface and a front print area.
Shoppers search for the same product with different words. Here is what each one means.

A knit or fleece covering for the head and neck that leaves part of the face open.
Another name for a balaclava, common in the US and in streetwear.
A single opening, either for the eyes and nose or for the whole face.
Separate openings for each eye and the mouth.
A large opening that shows the whole face, often worn with the hood pushed back.
A tube of fabric around the neck that can be pulled up over the nose.
Choose a surface for the whole balaclava. The preset changes how the texture looks in 3D.

Large rounded stitches for a heavy, cold-weather knit look.

A soft brushed surface for cold-weather and outdoor styles.

A grid texture that reads like technical base-layer wear.

A shaggy pile surface for cold-weather and fashion balaclavas.

A dotted mesh look. It shows the pattern but stays opaque.

A fine knit that keeps small text on the front easy to read.
How much of the head, face and neck a balaclava covers changes how it is worn and sold.

Hugs the head and neck like a base layer, so a front logo sits flat.
A drawstring around the face lets the wearer tighten or loosen the fit.
A beanie on top and a neck gaiter below, worn together or pulled down.
A hood that falls past the neck onto the shoulders, for costume and fashion pieces.
A quilted shell with a zip that sits looser and warmer.
Shows most of the face; easy to wear with a hood pushed back.
A face covering curves in every direction. Compare the flat artwork with the 3D result before you print.

