Cardboard box templatesMailers, shipping boxes, shoe boxes

These cardboard box templates are drawn for corrugated board and labeled with their FEFCO style. Choose E-flute or B-flute and the outside size updates with the board.

Cardboard box styles and FEFCO codes

FEFCO is the code book for corrugated box styles, and many printers quote by its numbers. Each style opens at the default inside size below.

StyleFEFCODefault inside sizeDefault board
Mailer0427203.0 × 152.0 × 76.0 mm (7.9921 × 5.9843 × 2.9921 in)E-flute, 1.5 mm
Pizza0426305.0 × 305.0 × 45.0 mm (12.0079 × 12.0079 × 1.7717 in)E-flute, 1.5 mm
Shipping0201305.0 × 254.0 × 203.0 mm (12.0079 × 10.0000 × 7.9921 in)B-flute, 3.0 mm
Open-top0200300.0 × 200.0 × 100.0 mm (11.8110 × 7.8740 × 3.9370 in)B-flute, 3.0 mm
One-piece folder0401300.0 × 200.0 × 50.0 mm (11.8110 × 7.8740 × 1.9685 in)E-flute, 1.5 mm
Air-cell folder0403160.0 × 200.0 × 50.0 mm (6.2992 × 7.8740 × 1.9685 in)E-flute, 1.5 mm
Shoe box, 2 pieces0301400.0 × 220.0 × 100.0 mm (15.7480 × 8.6614 × 3.9370 in)E-flute, 1.5 mm
Telescope0300400.0 × 220.0 × 100.0 mm (15.7480 × 8.6614 × 3.9370 in)E-flute, 1.5 mm
Three piece0310200.0 × 120.0 × 180.0 mm (7.8740 × 4.7244 × 7.0866 in)E-flute, 1.5 mm

E-flute or B-flute: what changes

Same inside size, different board. The flute adds to every wall, so the outside size and the flat sheet both grow.

Board thickness menu with E-flute and B-flute for a mailer box dieline

E-flute, 1.5 mm

A fine, flat corrugated board that takes print well. Usually chosen for retail mailers and light products.

B-flute, 3.0 mm

Thicker, with more crush strength. Usually chosen for shipping boxes and boxes that get stacked.

0.5 mm board

Shoe box, telescope and three piece styles can also be drawn on 0.5 mm board, for light boxes that never travel on their own.

What it does to the size

A mailer with a 203.0 × 152.0 × 76.0 mm inside measures 218.0 × 156.5 × 79.0 mm outside on E-flute and 233.0 × 161.0 × 82.0 mm on B-flute. The flat sheet grows from 537.0 × 535.8 mm to 567.0 × 539.5 mm.

How big each cardboard box can be

Inside sizes in mm. The editor stops at these limits.

StyleLengthWidthHeightAlso needs
Mailer (0427)180.0–500.0120.0–350.035.0–140.0Height up to 0.55 × width
Pizza (0426)180.0–500.0120.0–500.030.0–140.0Height up to 0.55 × width
Shipping (0201), Open-top (0200)150.0–600.0100.0–400.050.0–600.0Width no more than length
One-piece folder (0401)150.0–500.0100.0–350.020.0–120.0Height up to 0.6 × width
Air-cell folder (0403)100.0–400.0100.0–350.025.0–120.0Height up to 0.6 × width
Shoe box (0301), Telescope (0300)240.0–600.0132.0–330.060.0–150.0Height up to 0.48 × length and 0.9 × width
Three piece (0310)120.0–300.072.0–180.0108.0–270.0Height up to 2 × length and 4 × width

One piece or lid and base

Corrugated boxes come in two builds. The build decides how the box opens and how many sheets you cut.

One-sheet mailer box dieline

One sheet

Mailer, pizza, shipping, open-top and folder styles fold from a single sheet. One die, one cut, and the lid is part of the box.

Telescope box dieline with the lid and base as two sheets

Lid and base, two sheets

Shoe box and telescope styles cut the lid and the base as separate sheets. The lid slides over the base, so the box opens without tearing a flap.

Three piece box dieline with lid, body and base

Three sheets

The three piece style cuts a lid, a body and a base. It suits tall boxes, where the top and bottom close a tube-like body.

Telescope box PDF with the lid and base on separate pages

Artwork on every sheet

Each sheet comes as its own page in the download, so a lid-and-base box needs artwork placed on both.

Flat dieline, folded box

On the left, the sheet you download. On the right, the same sheet folded in the 3D preview.

Flat mailer box dielineMailer box folded from the same dieline
Mailer. The panels around the base fold up into walls, and the front tuck locks the lid shut.
Flat shipping box dielineShipping box folded from the same dieline
Shipping box. Four flaps on each end meet in the middle; a glue tab joins the side seam.
Flat shoe box dieline in two piecesShoe box with the lid fitted on the base
Shoe box. Two sheets: a shallow lid and a deeper base, folded separately and fitted together.

Cardboard box template questions

What people ask before they print a corrugated box.

What does a FEFCO code tell a printer?

It names the construction, so 0427 means the same mailer to any printer who works from the code book. You still give the size and the board.

Should I give the printer inside or outside sizes?

Inside size when the product has to fit; outside size when the box has to fit a shelf or a courier limit. The editor's Info tab shows both, and the outside size moves with the flute.

Which cardboard box suits heavy items?

Usually a shipping box (FEFCO 0201) on B-flute. The 3.0 mm board takes more weight than E-flute, and the four flaps on each end can be taped shut.

Why does the mailer box stop getting taller?

Its height is held to 0.55 × the width, and the editor stops at the limit.

Can I try a dieline before I pay?

Yes. Any dieline opens at its default size with the 3D preview and the Info numbers. Changing the size or the board thickness, and downloading files, need a Plus plan: $12 a month or $72 a year.

Can I preview my artwork on a mailer box?

Yes. Design in 3D in the dieline editor opens the matching mailer box mockup at the same size, in a new tab. Place your artwork there and turn the box around.