E-flute, 1.5 mm
A fine, flat corrugated board that takes print well. Usually chosen for retail mailers and light products.
These cardboard box templates are drawn for corrugated board and labeled with their FEFCO style. Choose E-flute or B-flute and the outside size updates with the board.
2 dielines shown
FEFCO is the code book for corrugated box styles, and many printers quote by its numbers. Each style opens at the default inside size below.
| Style | FEFCO | Default inside size | Default board |
|---|---|---|---|
| Mailer | 0427 | 203.0 × 152.0 × 76.0 mm (7.9921 × 5.9843 × 2.9921 in) | E-flute, 1.5 mm |
| Pizza | 0426 | 305.0 × 305.0 × 45.0 mm (12.0079 × 12.0079 × 1.7717 in) | E-flute, 1.5 mm |
| Shipping | 0201 | 305.0 × 254.0 × 203.0 mm (12.0079 × 10.0000 × 7.9921 in) | B-flute, 3.0 mm |
| Open-top | 0200 | 300.0 × 200.0 × 100.0 mm (11.8110 × 7.8740 × 3.9370 in) | B-flute, 3.0 mm |
| One-piece folder | 0401 | 300.0 × 200.0 × 50.0 mm (11.8110 × 7.8740 × 1.9685 in) | E-flute, 1.5 mm |
| Air-cell folder | 0403 | 160.0 × 200.0 × 50.0 mm (6.2992 × 7.8740 × 1.9685 in) | E-flute, 1.5 mm |
| Shoe box, 2 pieces | 0301 | 400.0 × 220.0 × 100.0 mm (15.7480 × 8.6614 × 3.9370 in) | E-flute, 1.5 mm |
| Telescope | 0300 | 400.0 × 220.0 × 100.0 mm (15.7480 × 8.6614 × 3.9370 in) | E-flute, 1.5 mm |
| Three piece | 0310 | 200.0 × 120.0 × 180.0 mm (7.8740 × 4.7244 × 7.0866 in) | E-flute, 1.5 mm |
Same inside size, different board. The flute adds to every wall, so the outside size and the flat sheet both grow.

A fine, flat corrugated board that takes print well. Usually chosen for retail mailers and light products.
Thicker, with more crush strength. Usually chosen for shipping boxes and boxes that get stacked.
Shoe box, telescope and three piece styles can also be drawn on 0.5 mm board, for light boxes that never travel on their own.
A mailer with a 203.0 × 152.0 × 76.0 mm inside measures 218.0 × 156.5 × 79.0 mm outside on E-flute and 233.0 × 161.0 × 82.0 mm on B-flute. The flat sheet grows from 537.0 × 535.8 mm to 567.0 × 539.5 mm.
Inside sizes in mm. The editor stops at these limits.
| Style | Length | Width | Height | Also needs |
|---|---|---|---|---|
| Mailer (0427) | 180.0–500.0 | 120.0–350.0 | 35.0–140.0 | Height up to 0.55 × width |
| Pizza (0426) | 180.0–500.0 | 120.0–500.0 | 30.0–140.0 | Height up to 0.55 × width |
| Shipping (0201), Open-top (0200) | 150.0–600.0 | 100.0–400.0 | 50.0–600.0 | Width no more than length |
| One-piece folder (0401) | 150.0–500.0 | 100.0–350.0 | 20.0–120.0 | Height up to 0.6 × width |
| Air-cell folder (0403) | 100.0–400.0 | 100.0–350.0 | 25.0–120.0 | Height up to 0.6 × width |
| Shoe box (0301), Telescope (0300) | 240.0–600.0 | 132.0–330.0 | 60.0–150.0 | Height up to 0.48 × length and 0.9 × width |
| Three piece (0310) | 120.0–300.0 | 72.0–180.0 | 108.0–270.0 | Height up to 2 × length and 4 × width |
Corrugated boxes come in two builds. The build decides how the box opens and how many sheets you cut.

Mailer, pizza, shipping, open-top and folder styles fold from a single sheet. One die, one cut, and the lid is part of the box.

Shoe box and telescope styles cut the lid and the base as separate sheets. The lid slides over the base, so the box opens without tearing a flap.

The three piece style cuts a lid, a body and a base. It suits tall boxes, where the top and bottom close a tube-like body.

Each sheet comes as its own page in the download, so a lid-and-base box needs artwork placed on both.
On the left, the sheet you download. On the right, the same sheet folded in the 3D preview.






What people ask before they print a corrugated box.
It names the construction, so 0427 means the same mailer to any printer who works from the code book. You still give the size and the board.
Inside size when the product has to fit; outside size when the box has to fit a shelf or a courier limit. The editor's Info tab shows both, and the outside size moves with the flute.
Usually a shipping box (FEFCO 0201) on B-flute. The 3.0 mm board takes more weight than E-flute, and the four flaps on each end can be taped shut.
Its height is held to 0.55 × the width, and the editor stops at the limit.
Yes. Any dieline opens at its default size with the 3D preview and the Info numbers. Changing the size or the board thickness, and downloading files, need a Plus plan: $12 a month or $72 a year.
Yes. Design in 3D in the dieline editor opens the matching mailer box mockup at the same size, in a new tab. Place your artwork there and turn the box around.